How to maintain the cross-cutting machine for better operation

Do a good job of maintenance and maintenance. First of all, daily support should be in place. The standard is that smooth, clean, clear (no dust, no debris) is in place to ensure that the sliding part of the equipment is in good condition.

Followed by maintenance work, stop regular and irregular inspections of the rotating parts (especially for real-time monitoring of consumables). Regular adjustments are made, regular changes are made, commutators are carefully recorded, and the purpose of extending the service life of the equipment is reached.

To improve the technical quality and degree of the operator, it is necessary to take special personnel to control the local operation, and no one is allowed to operate it without any permission.

Crosscutting machine is a carton processing machine. Cross-cutting machine The cross-cutting machine in the corrugated board consumption line is the mechanical equipment for the cadre to stop the cardboard waste cutting. His technical performance and equipment adjustment directly affect whether the cutting size of the waste cardboard can be accurate, whether the pressure line can be broken and Whether the appearance of the cut can be lubricated. The cardboard consumption line has three functions of corrugating forming, laminating machine and slitting machine, and the cutting function is completed by slitting machine and cross cutting machine.

The daily maintenance should be in place. The principle is that the lubrication should be in place, cleaned in time, cleaned to make it dust-free, free of debris, and ensure that the sliding part of the computer cross-cutting machine is in good condition.

The second is maintenance work, and regular and irregular inspections of the rotating parts are required. Regular adjustments are made and replaced regularly.

Third, the configuration is high. It is recommended to use high-quality slitting cutters and cross-cutting knives, which not only improves the production efficiency, but also the high-precision matching knife will not damage the equipment.

Fourth, the control of the computer cross-cutting machine should be operated by a special person, and it is not allowed to operate without authorization. It is also necessary to improve the technical level of the operator and reduce the factors of human damage.